Skip to content
Referral service, not a plumbing contractor. How we work
Slab Leak Repair

Cost guide · Updated November 2026

How much does slab leak repair cost?

Most of the price comes down to three things: how the leak is found, how it’s fixed, and what has to be torn up and put back.

National average

$2,300

Typical range

$630–$4,400

Leak detection

$150 – $600

Source: Angi, cost data based on HomeAdvisor research.

Short answer

Slab leak repair costs about $2,300 on average, with most jobs between $630 and $4,400, according to Angi’s HomeAdvisor-based cost data. Leak detection adds about $150 to $600. The repair method, the leak’s location and the concrete or flooring that must be restored drive the final price.

Calculator

Estimate your range

A planning range, not a quote. Only a plumber who has tested your home can price the job.

Repair method
Floor over the leak

Estimated total

$650 – $2,250

Spot repair · tile · with detection

  • Leak detection$150 – $600Angi
  • Spot repair$250 – $850Angi
  • Concrete patch$250 – $800Fixr
  • Restore tileQuote needed

Not included (quote needed): restore tile. Ranges from published cost data (Angi/HomeAdvisor, Fixr). Your price depends on your home and region.

Get a real quote

Slab leak repair cost by method

Every range links to its source. Restoration of floors and walls is usually extra.

Slab leak repair cost by method, with sources
ItemTypical rangeNotesSource
Leak detection$150 – $600Electronic or acoustic locatingAngi
Pipe leak repair (spot repair)$250 – $850Pipe work only; concrete and flooring extraAngi
Concrete patch$250 – $800Closing the slab after a spot repairFixr
Slab leak reroute$600 – $4,000New line above the floorAngi
Epoxy pipe lining$500 – $2,000Seals the pipe from insideFixr
Slab replacement$3,600 – $8,000Severe cases onlyAngi
Plumber labor (per hour)$45 – $200Varies by regionAngi
Repipe (whole home)Quote neededDepends heavily on home size and layout—
Bar chart of U.S. slab leak repair cost ranges: leak detection $150–$600, pipe leak repair $250–$850, reroute $600–$4,000, epoxy lining $500–$2,000, typical total $630–$4,400
Slab leak repair cost ranges. Sources: Angi/HomeAdvisor, Fixr.

What affects the cost of slab leak repair?

Six factors account for most of the difference between quotes.

  1. 01

    Where the leak is

    Leaks under kitchens, bathrooms or expensive flooring cost more to reach and restore than leaks under a garage or closet.

  2. 02

    The repair method

    Spot repairs, reroutes, epoxy lining and repipes have very different labor and material costs.

  3. 03

    Finding the leak

    Electronic or acoustic detection is usually billed separately from the repair.

  4. 04

    Floor and concrete restoration

    Replacing tile or hardwood over the leak can cost more than the plumbing itself.

  5. 05

    Pipe material and age

    Older or corroded lines can make rerouting or repiping the smarter long-term spend.

  6. 06

    Local labor rates and permits

    Plumber labor runs about $45 to $200 an hour (Angi), and permit rules vary by city.

Ask your insurer before work starts. Some policies cover reaching the leak and the resulting water damage, but not the pipe repair itself. Read the insurance guide

Frequently asked questions

What is the average cost of slab leak repair?

Angi reports an average of $2,300, with most homeowners paying $630 to $4,400, based on HomeAdvisor research. Fixr puts its national average at $2,500, with a typical range of $1,000 to $4,000.

How much does slab leak detection cost?

Angi lists slab leak detection at about $280 on average, typically $150 to $600. Some plumbers credit the detection fee toward the repair if you hire them.

Is rerouting or repairing a slab leak cheaper?

A single spot repair is often cheaper up front, but add concrete and flooring restoration. Angi lists reroutes at $600 to $4,000. Rerouting can cost less overall when the leak sits under expensive flooring or the pipe is likely to leak again. See repair methods compared.

Why do slab leak repair quotes vary so much?

Quotes can assume different methods, and some include concrete and flooring restoration while others leave it out. Compare line by line: detection, repair, concrete, flooring and drywall.

Does homeowners insurance pay for slab leak repair?

Some policies cover water damage from a sudden leak and the cost of reaching it, but often not the pipe repair itself. See our insurance guide.

Can I get money back on the water bill a slab leak ran up?

Often, yes. Many water utilities credit part of the extra water once you prove the leak was repaired, but deadlines and caps vary. Compare the rules in our leak adjustment database.

Sources

  1. [1]Angi (cost data based on HomeAdvisor research), “How Much Does Slab Leak Repair Cost?.” match.angi.com/cost/plumbing/slab-leak-repair (accessed November 17, 2026)
  2. [2]Angi, “How Much Does Foundation Slab Leak Repair Cost?.” www.angi.com/articles/how-much-does-foundation-slab-leak-repair-cost.htm (accessed November 17, 2026)
  3. [3]Fixr, “How much does it cost to repair a slab leak?.” www.fixr.com/costs/slab-leak-repair (accessed November 17, 2026)

A range is a start. A test gives you the real number.

Free for homeowners. If we don’t cover your ZIP yet, we’ll say so.