Skip to content
Referral service, not a plumbing contractor. How we work
Slab Leak Repair
FREELicensed, insured plumbers. Verified before every match.

Slab leak repair, explained. Plus a verified plumber when you need one.

Everything you need to fix a slab leak: the warning signs, how leaks are found, the four repair methods, real costs and insurance, plus a free match with a licensed local plumber when we have one in your area.

  • No cost to homeowners
  • Shared with one plumber only
  • We tell you if we can’t help
FIG. 01 — ANATOMY OF A SLAB LEAK
FLOORCONCRETE SLABSUPPLY LINEUNDER SLABLEAK POINTSATURATED SOIL
A slab leak is a break in a water or drain line that runs beneath a concrete foundation, often out of sight for months.

Slab leak repair cost

Most homeowners pay $630 to $4,400

Source: Angi, cost data based on HomeAdvisor research.

Average job
$2,300
Leak detection
$150–$600
Pipe reroute
$600–$4,000
Full cost guide

01 · Signs

Six signs worth a closer look

Try the symptom checker

Warm spots on the floor

A leaking hot-water line can heat the concrete above it.

Meter moving with taps off

If nothing runs and the meter still turns, water is escaping somewhere.

A water bill that jumps

A steady hidden leak adds up even when your habits don’t change.

The sound of running water

Hissing or rushing near the floor when no fixture is on.

Damp floors or a musty smell

Wet carpet pad, lifting tile or mildew with no visible source.

New cracks in floors or walls

Moving water can shift the soil under a foundation over time.

These signs can have other causes. Only a leak detection test confirms a slab leak. Read the full guide

02 · How it works

Honest matching, in three steps

  1. 01

    Tell us what’s happening

    A two-minute form: the problem, your ZIP, how urgent it is, and how to reach you.

  2. 02

    We check verified coverage

    We only route to plumbers whose license and insurance are on file for your ZIP code.

  3. 03

    You hear back either way

    A matched plumber contacts you, or we tell you we don’t cover your area yet. Hiring is always your call.

How we’re paid

What is slab leak repair?

Slab leak repair is the work of finding and fixing a leaking water or drain pipe that runs in or under a home’s concrete slab foundation. It happens in two parts: leak detection, which pinpoints the leak without guessing, and the repair itself, which either opens the slab at the leak, bypasses it with a new line, seals the pipe from inside, or reaches it from below. Fast repair matters because a pressurized supply line can leak around the clock.

How does slab leak repair work?

  1. Confirm a leak. Read the water meter, use no water for two hours, and read it again. A change suggests a leak, according to the EPA. How detection works
  2. Pinpoint it. A plumber isolates hot, cold and drain lines with pressure tests, then uses acoustic or thermal equipment to mark the spot.
  3. Choose the method. Spot repair, reroute, lining, tunneling or repipe, based on the leak location, pipe condition and what sits on the slab.
  4. Repair and test. The plumber fixes or bypasses the line and pressure-tests the system.
  5. Restore. Concrete, drywall and floors are patched, and any water damage is dried out.

Read the step-by-step guide to fixing a slab leak →

Which slab leak repair method is best?

There isn’t one best method. A single leak in healthy pipe is usually a spot repair. A home with expensive floors or aging pipe often comes out ahead with a reroute. Repeat leaks point toward a repipe.

Slab leak repair methods compared
MethodBreaks the slab?Best forTypical cost
Direct spot repairYesOne located leak in healthy pipe$250–$850 for the pipe repair¹
Pipe rerouteNoCostly floors, or pipe likely to leak again$600–$4,000¹
Epoxy pipe liningNoSmall leaks in sound pipe$500–$2,000²
Under-slab tunnelingNoLeaks near an outside wall, drain linesQuote needed
Whole-home repipeNoRepeat leaks, aging pipe throughoutQuote needed

¹ Angi, cost data based on HomeAdvisor research. ² Fixr. Ranges vary by region and job. Full comparison

How long does slab leak repair take?

Most slab leak repairs take a few hours to three days, depending on the method and how hard the leak is to reach, according to Angi and This Old House. If floors or cabinets were damaged, replacing them can add weeks. See the timeline by stage

How much does it cost, and will insurance pay?

Angi puts the average slab leak repair at about $2,300, with most jobs between $630 and $4,400, and detection at $150 to $600. Homeowners insurance often treats a slab leak as three costs: water damage (often covered if sudden), reaching the leak (sometimes covered) and the pipe repair itself (often excluded). Read your policy and call your insurer before demolition.

Cost guide →Insurance guide →

Can you repair a slab leak yourself?

You can confirm a likely leak, shut off the water and document damage. Locating and repairing a leak under concrete needs professional equipment, licensed labor and often a permit, so it’s a plumber’s job in almost every case. What you can safely do

How do I choose a slab leak repair company?

  • Verify the license with your state board and ask for proof of insurance.
  • Insist the leak is located before anything is opened.
  • Get a written, itemized quote that says who handles permits, concrete and floors.
  • Ask about the warranty and experience with insurance claims.

10 questions to ask before hiring →

How can I prevent another slab leak?

Keep household water pressure at or below 80 psi, the limit in the International Plumbing Code, which requires a pressure-reducing valve above it. Run a meter test a few times a year, keep drainage away from the foundation, and act on early signs. Six prevention steps

05 · Guides

Sourced. Dated. Independent.

All guides

06 · Questions

Straight answers to common questions

What is a slab leak?

A slab leak is a leak in a water supply or drain line that runs in or beneath a home’s concrete slab foundation. Supply-line leaks can run nonstop because the line is pressurized; drain-line leaks happen only while water drains. Learn how repairs work.

How can I tell if I have a slab leak?

Read your water meter, use no water for two hours, then read it again. If it changed, you probably have a leak somewhere, according to the EPA. Warm floor spots, a rising bill and the sound of running water point toward the slab. See all the signs.

How much does slab leak repair cost?

Angi reports an average of about $2,300, with most jobs between $630 and $4,400, based on HomeAdvisor research. Leak detection typically adds $150 to $600. Our cost guide breaks the price down by method.

Does homeowners insurance cover slab leaks?

Sometimes. Policies can cover water damage from a sudden and accidental plumbing leak, and some cover tearing out floors to reach it. The pipe repair itself is often excluded. Read the insurance guide.

How long does slab leak repair take?

Most repairs take a few hours to three days, according to Angi and This Old House. Restoring damaged floors or cabinets can add weeks. See the full timeline.

Can a slab leak be fixed without breaking the slab?

Often, yes. A pipe reroute runs a new line through walls or the attic, epoxy lining seals the pipe from inside, and tunneling reaches the leak from outside. Which one fits depends on the leak and your pipes. Compare the methods.

Is Slab Leak Repair a plumbing company?

No. We publish homeowner guides and refer requests to one independent plumber whose license and insurance we’ve verified for your ZIP code. Homeowners pay nothing; plumbers pay us for referrals. How it works.

Check for a verified slab leak specialist near you.

Free for homeowners. If we don’t cover your ZIP yet, we’ll say so.

For licensed plumbers

Slab leak requests in the ZIP codes you serve, with the right to decline or dispute any lead.

Apply to the network