Skip to content
Referral service, not a plumbing contractor. How we work
Slab Leak Repair

Epoxy pipe lining

Epoxy pipe lining for slab leaks: how it works and what it costs

Lining seals a leaking pipe from the inside, so the slab and your floors can stay in place.

By Slab Leak Repair editorial teamUpdated 2 cited sourcesHow we write our guides

Short answer

Epoxy pipe lining repairs a slab leak from inside the pipe. The line is drained, dried and cleaned, then coated with epoxy that seals small leaks and forms a new inner surface, usually with little or no demolition. Fixr lists lining at about $500 to $2,000. It suits structurally sound pipe with small leaks, not badly damaged lines.

Cutaway of a pipe with a cured epoxy liner sealing a pinhole leak from inside
Epoxy lining seals a pipe from the inside.

How does epoxy pipe lining work?

  1. The plumber isolates and drains the affected line.
  2. The pipe is dried and cleaned inside to remove corrosion and buildup.
  3. Epoxy is applied to coat the inner wall, sealing pinholes and small cracks.
  4. The epoxy cures, the line is pressure-tested, and water is restored.

When is lining a good fit?

  • Small leaks or pinholes in pipe that is otherwise structurally sound.
  • Leaks under finishes that are expensive to remove.
  • Homes where rerouting would mean opening many walls.

What are the limitations of epoxy lining?

  • Badly collapsed, separated or severely corroded pipe may not be suitable.
  • Not every plumber offers it, and local code acceptance varies.
  • Warranties differ widely, so get the terms in writing.

How much does epoxy pipe lining cost?

Fixr lists lining at about $500 to $2,000.[1] Angi prices cured-in-place repair at $80 to $250 per linear foot.[2] Your quote depends on pipe length, diameter and access. Compare it with other methods in the cost guide.

What should I ask before choosing lining?

  • Is my pipe a good candidate, and how did you check?
  • Is the epoxy certified for drinking water use?
  • What does the warranty cover, and for how long?
  • Is lining accepted by local code here, and is a permit needed?

How do I get help with this repair?

Slab Leak Repair isn’t a plumbing contractor. When you send a request, we look for one independent plumber whose license and insurance we’ve verified and who serves your ZIP code. If we find one, we share your request with them only. If we don’t cover your area yet, we tell you and don’t pass your details on. You’re never obligated to hire anyone.

Safety first: if water is surfacing, shut off the main valve before anything else, keep water away from outlets and appliances, and don’t dig outside without calling 811. See emergency first steps.

Check for a verified plumber in your ZIP code · What to ask before hiring

Frequently asked questions

Is epoxy lining cheaper than rerouting?

It can be, especially when a reroute would open many walls. Angi lists reroutes at $600 to $4,000,[2] while Fixr lists lining at $500 to $2,000.[1] Get both priced for your home.

How long does epoxy lining last?

It depends on the product, the installer and the pipe’s condition. Ask for the expected service life and the written warranty before you commit.

Sources

  1. [1]Fixr, “How much does it cost to repair a slab leak?.” www.fixr.com/costs/slab-leak-repair (accessed )
  2. [2]Angi, “How Much Does Foundation Slab Leak Repair Cost?.” www.angi.com/articles/how-much-does-foundation-slab-leak-repair-cost.htm (accessed )

Check for a verified slab leak specialist near you.

Free for homeowners. If we don’t cover your ZIP yet, we’ll say so.