Tool
How much is a hidden leak costing you?
Turn off every fixture, read your water meter twice, and enter the numbers. You’ll see how much water is escaping and, with your rate, what it costs.
How do I take the readings?
Shut off every faucet, appliance and irrigation zone. Write down the meter reading, wait (the EPA’s test uses two hours), then read it again without using any water. Enter both readings and the minutes between them. Our detection guide shows where the meter is and how to read it.
Where do I find my water rate?
Your bill lists water and, usually, sewer charges per 1,000 gallons or per hundred cubic feet (CCF). Add them together. One CCF is 748 gallons, so divide a per-CCF price by 0.748 to get the price per 1,000 gallons. Tiered rates vary, so treat the result as an approximation.
What the estimate doesn’t do
It shows that water is escaping and how fast, not where. Toilets and irrigation are common culprits; a leak under the slab is only one possibility. It assumes the leak runs at a steady rate.