Skip to content
Referral service, not a plumbing contractor. How we work
Slab Leak Repair

Repair vs. repipe

Slab leak repair vs. repipe: which makes sense?

One leak is a repair. A pattern of leaks is a decision about the whole plumbing system.

By Slab Leak Repair editorial teamUpdated 2 cited sourcesHow we write our guides

Short answer

For a first, isolated slab leak in otherwise sound pipe, a repair is usually enough: Angi puts the average at about $2,300.[1] A whole-house repipe runs $1,500 to $15,000, around $7,500 on average,[2] but can make sense after repeat leaks or when the pipe is old and corroded throughout, because it replaces the lines most likely to leak next.

Comparison of a single slab leak repair averaging about 2,300 dollars versus a whole-house repipe averaging about 7,500 dollars, with when each makes sense
National averages from Angi. Your quotes will vary.

How do a slab leak repair and a repipe compare?

Slab leak repair vs. whole-house repipe
FactorRepair one leakRepipe the house
Typical costAbout $2,300 average; $630–$4,400 typicalAbout $7,500 average; $1,500–$15,000
What it fixesThe leaking section, or one rerouted lineMost or all supply lines, usually routed overhead
Best forFirst leak, sound pipeRepeat leaks, aging or corroded pipe
DisruptionFloor or wall openings at one spotOpenings in many walls and ceilings
Future slab leaksOther old pipe can still failNew lines don’t run through the slab

When is repairing the single leak the right call?

  • It’s the first leak in this house.
  • The plumber confirms the rest of the pipe is in reasonable condition.
  • The leak is located precisely and is reachable with limited demolition, or can be rerouted.

When should I consider a repipe instead?

  • You’ve had two or more slab leaks.
  • The plumber finds corrosion or thinning along other runs.
  • You’re already opening walls for a remodel.
  • You plan to stay long enough that repeated repairs would add up to more than a repipe.

How do I compare the cost over time?

Add up what you’ve spent on slab leak repairs, plus floor restoration and higher water bills, and compare that with a repipe quote for your home. If another leak is likely, a repipe can cost less than two or three more repairs. Get written quotes for both options; our quote checklist keeps them comparable, and the method comparison tool shows where each option fits.

Frequently asked questions

Does a repipe go through the slab?

Usually not. Most repipes run new supply lines through walls, ceilings or the attic and abandon the old lines in the slab. See pipe rerouting and PEX vs. copper.

Sources

  1. [1]Angi (cost data based on HomeAdvisor research), “How Much Does Slab Leak Repair Cost?.” match.angi.com/cost/plumbing/slab-leak-repair (accessed )
  2. [2]Angi, “How Much Does It Cost to Repipe a House?.” www.angi.com/articles/cost-to-repipe-a-house.htm (accessed )

Check for a verified slab leak specialist near you.

Free for homeowners. If we don’t cover your ZIP yet, we’ll say so.