Skip to content
Referral service, not a plumbing contractor. How we work
Slab Leak Repair

Prevention

Automatic water shutoff valves: can they catch a slab leak?

Floor sensors only catch water you can see. A valve on the main line can also notice water you can’t, which is the kind of leak a slab leak usually is.

By Slab Leak Repair editorial teamUpdated 5 cited sourcesHow we write our guides

Short answer

Spot sensors under sinks cannot see a slab leak, but some whole-home shutoff valves on the main line can. They watch flow and pressure, and some run a daily test that closes the valve and checks for pressure loss. Moen says its test can detect a drip as slow as one drop per minute.

Diagram comparing a spot leak sensor under a sink, which only detects visible water, with a whole-home shutoff valve on the main line that monitors flow and runs a pressure-loss test covering pipes under the slab
Spot sensors detect water on the floor. A valve on the main line can also catch hidden leaks downstream.

What types of water leak detection systems are there?

Home water protection falls into two broad groups, and they catch different leaks:

Leak detection device types
TypeHow it worksCan it detect a slab leak?
Spot sensorSits on the floor and alerts when it gets wetNo; the water is under the floor
Spot sensor with shutoffA wet sensor tells a main-line valve to closeNo; same limit as the sensor
Flow-based shutoff valveWatches flow on the main line and closes on unusual useSometimes, if the leak flow is large or continuous
Valve with pressure-loss testCloses briefly and checks whether pressure dropsYes, often, including small leaks

How can a shutoff valve detect a hidden leak?

By testing the pipes it protects. Moen describes its MicroLeak Test like this: the valve closes, then monitors whether pressure in the plumbing stays stable for several minutes. If pressure drops, water is leaving somewhere downstream.[1] Moen says the test can pick up a drip as slow as one drop per minute.[1]

This is the same idea as the two-hour meter test, automated. It tells you a leak exists, not where. A leaking toilet flapper can trigger the same alert, so rule out fixtures first, then call a plumber to locate the leak.

Do insurers give discounts for automatic water shutoff valves?

Some do. Florida Peninsula Insurance describes a water leak detection discount available to some homeowners who install approved devices.[2] PEMCO offers eligible policyholders a discount after a verified Flo installation, says the amount varies by customer and policy, and notes plainly that no device can prevent every leak or every type of water damage.[3] Eligibility, the size of any discount and the devices that qualify vary by insurer and state, so NerdWallet suggests asking your insurer before you buy.[4]

What are the limits of automatic shutoff valves?

  • They only protect pipes downstream of the valve, so a leak in the service line between the meter and the valve is not covered; see main water line leaks.
  • Drain leaks are invisible to them, because drains are not pressurized; see cast iron drain pipes.
  • Placement matters. Insurance industry magazine IA reported a homeowner whose valve, installed in an underground box, stopped working after the box flooded with mud.[5]
  • Most need power and Wi-Fi to alert you, and a plumber to install them on the main line.

What should I look for in an automatic shutoff valve?

If hidden leaks under a slab are the concern, compare products on these points rather than on the app alone:

  • A scheduled pressure-loss test, not just flow monitoring, so slow leaks can be caught.
  • A pipe size that matches your main line, and an indoor or protected install location.
  • What happens without power or Wi-Fi: whether the valve still closes, and how you are alerted.
  • Whether your insurer lists the device for a discount, and what proof of installation it wants.
  • Ongoing costs, such as any subscription needed for alerts or tests.

Is an automatic water shutoff valve worth it for a slab home?

It is most useful in homes with past slab leaks, older copper under the slab, frequent travel, or a second home. It does not replace fixing a known leak or keeping water pressure in range. If an alert does point to a leak, follow our slab leak detection guide before any concrete is broken.

Frequently asked questions

Can I install an automatic shutoff valve myself?

Most whole-home valves are installed on the main water line, which means cutting into the pipe. Many manufacturers recommend a licensed plumber, and some insurers ask for proof of professional installation.

Will the valve shut off water while I’m showering?

Flow-based systems learn normal use and set thresholds, and pressure tests are usually scheduled when water is unlikely to be used. A long shower can still trigger an alert on some settings, which you can usually adjust in the app.

Do spot leak sensors still help?

Yes, for visible leaks from water heaters, washing machines, dishwashers and sinks. They just cannot see water under a slab, so pair them with a main-line valve if hidden leaks are the concern.

Sources

  1. [1]Moen, “Understanding your Microleak Test.” solutions.moen.com/Moen_Flo_Shutoff/Get_to_know_your_Product/Understanding_your_Microleak_Test (accessed )
  2. [2]Florida Peninsula Insurance Company, “How Can Water Leak Detection Devices Help Protect Your Florida Home?.” www.floridapeninsula.com/blog/how-can-water-leak-detection-devices-help-protect-your-florida-home (accessed )
  3. [3]PEMCO Insurance, “A smarter way to help protect your home from water damage.” pemco.com/blog/moen-flo (accessed )
  4. [4]NerdWallet, “Smart-Home Devices Could Save You Money on Home Insurance.” www.nerdwallet.com/insurance/homeowners/learn/smart-home-insurance-discount (accessed )
  5. [5]IA Magazine, “Preventing Costly Water Damage Through Effective Technology Installation.” www.iamagazine.com/?p=32407 (accessed )

Check for a verified slab leak specialist near you.

Free for homeowners. If we don’t cover your ZIP yet, we’ll say so.